Release 7.1i - Fit H.38
Copyright(c) 1995-2003 Xilinx Inc. All rights reserved

 5-11-2011 10:53PM

NOTE: This file is designed to be imported into a spreadsheet program
such as Microsoft Excel for viewing, printing and sorting. The pipe '|'
character is used as the data field separator.
This file is also designed to support parsing.

Input file:  m220.ngd
output file: m220.pad
Part type:   xc9536xl
Speed grade: -5
Package:     pc44

Pinout by Pin Number:

-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
Pin Number|Signal Name|Pin Usage|Pin Name|Direction|IO Standard|IO Bank Number|{blank}|Slew Rate|Termination|{blank}|Voltage|Constraint|
P1|and_enable|I|I/O|INPUT|||||||||
P2|b_src0|I|I/O|INPUT|||||||||
P3|input_bus|I|I/O|INPUT|||||||||
P4|carry_out_|O|I/O|OUTPUT|||||||||
P5|ac_load|GCK|I/O/GCK1||||||||||
P6|ma_load|GCK|I/O/GCK2||||||||||
P7|mb_load|GCK|I/O/GCK3||||||||||
P8|shift1|I|I/O|INPUT|||||||||
P9|sc|I|I/O|INPUT|||||||||
P10|GND||GND||||||||||
P11|sr|I|I/O|INPUT|||||||||
P12|TIE||I/O||||||||||
P13|shift2|I|I/O|INPUT|||||||||
P14|adder_|O|I/O|OUTPUT|||||||||
P15|TDI||TDI||||||||||
P16|TMS||TMS||||||||||
P17|TCK||TCK||||||||||
P18|shift0|I|I/O|INPUT|||||||||
P19|pc_load|I|I/O|INPUT|||||||||
P20|mq|I|I/O|INPUT|||||||||
P21|VCC||VCCINT||||||||||
P22|mem|I|I/O|INPUT|||||||||
P23|GND||GND||||||||||
P24|b_src2|I|I/O|INPUT|||||||||
P25|tt_ls_in|I|I/O|INPUT|||||||||
P26|mb|O|I/O|OUTPUT|||||||||
P27|adder_right2_|I|I/O|INPUT|||||||||
P28|adder_right1_|I|I/O|INPUT|||||||||
P29|a_src2|I|I/O|INPUT|||||||||
P30|TDO||TDO||||||||||
P31|GND||GND||||||||||
P32|VCC||VCCIO||||||||||
P33|ma|O|I/O|OUTPUT|||||||||
P34|a_src1|I|I/O|INPUT|||||||||
P35|data|I|I/O|INPUT|||||||||
P36|b_src1|I|I/O|INPUT|||||||||
P37|a_src0|I|I/O|INPUT|||||||||
P38|ac|O|I/O|OUTPUT|||||||||
P39|carry_in_|I|I/O/GSR|INPUT|||||||||
P40|adder_left1_|I|I/O/GTS2|INPUT|||||||||
P41|VCC||VCCINT||||||||||
P42|adder_left2_|I|I/O/GTS1|INPUT|||||||||
P43|data_addr|I|I/O|INPUT|||||||||
P44|pc|O|I/O|OUTPUT|||||||||

To preserve the pinout above for future design iterations in
Project Navigator simply execute the (Lock Pins) process
located under the (Implement Design) process in a toolbox named
(Optional Implementation Tools) or invoke PIN2UCF from the
command line. The location constraints will be written into your
specified UCF file