Release 7.1i - Fit H.38
Copyright(c) 1995-2003 Xilinx Inc. All rights reserved

 5-13-2011 11:38AM

NOTE: This file is designed to be imported into a spreadsheet program
such as Microsoft Excel for viewing, printing and sorting. The pipe '|'
character is used as the data field separator.
This file is also designed to support parsing.

Input file:  pdp8.ngd
output file: pdp8.pad
Part type:   xc9536xl
Speed grade: -5
Package:     pc44

Pinout by Pin Number:

-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
Pin Number|Signal Name|Pin Usage|Pin Name|Direction|IO Standard|IO Bank Number|{blank}|Slew Rate|Termination|{blank}|Voltage|Constraint|
P1|TIE||I/O||||||||||
P2|TIE||I/O||||||||||
P3|break|O|I/O|OUTPUT|||||||||
P4|fetch|O|I/O|OUTPUT|||||||||
P5|clock|GCK|I/O/GCK1||||||||||
P6|TIE||I/O/GCK2||||||||||
P7|TIE||I/O/GCK3||||||||||
P8|TIE||I/O||||||||||
P9|intr|O|I/O|OUTPUT|||||||||
P10|GND||GND||||||||||
P11|TIE||I/O||||||||||
P12|TIE||I/O||||||||||
P13|ts2|O|I/O|OUTPUT|||||||||
P14|TIE||I/O||||||||||
P15|TDI||TDI||||||||||
P16|TMS||TMS||||||||||
P17|TCK||TCK||||||||||
P18|TIE||I/O||||||||||
P19|TIE||I/O||||||||||
P20|ts3|O|I/O|OUTPUT|||||||||
P21|VCC||VCCINT||||||||||
P22|TIE||I/O||||||||||
P23|GND||GND||||||||||
P24|ts4|O|I/O|OUTPUT|||||||||
P25|ts1|O|I/O|OUTPUT|||||||||
P26|TIE||I/O||||||||||
P27|mb3|I|I/O|INPUT|||||||||
P28|ir2|O|I/O|OUTPUT|||||||||
P29|mb0|I|I/O|INPUT|||||||||
P30|TDO||TDO||||||||||
P31|GND||GND||||||||||
P32|VCC||VCCIO||||||||||
P33|ir1|O|I/O|OUTPUT|||||||||
P34|TIE||I/O||||||||||
P35|ir0|O|I/O|OUTPUT|||||||||
P36|brkrq|I|I/O|INPUT|||||||||
P37|defer|O|I/O|OUTPUT|||||||||
P38|halt|I|I/O|INPUT|||||||||
P39|intrq|I|I/O/GSR|INPUT|||||||||
P40|mb1|I|I/O/GTS2|INPUT|||||||||
P41|VCC||VCCINT||||||||||
P42|mb2|I|I/O/GTS1|INPUT|||||||||
P43|exec|O|I/O|OUTPUT|||||||||
P44|TIE||I/O||||||||||

To preserve the pinout above for future design iterations in
Project Navigator simply execute the (Lock Pins) process
located under the (Implement Design) process in a toolbox named
(Optional Implementation Tools) or invoke PIN2UCF from the
command line. The location constraints will be written into your
specified UCF file