-- Copyright (C) 1991-2013 Altera Corporation -- Your use of Altera Corporation's design tools, logic functions -- and other software and tools, and its AMPP partner logic -- functions, and any output files from any of the foregoing -- (including device programming or simulation files), and any -- associated documentation or information are expressly subject -- to the terms and conditions of the Altera Program License -- Subscription Agreement, Altera MegaCore Function License -- Agreement, or other applicable license agreement, including, -- without limitation, that your use is for the sole purpose of -- programming logic devices manufactured by Altera and sold by -- Altera or its authorized distributors. Please refer to the -- applicable agreement for further details. -- -- This is a Quartus II output file. It is for reporting purposes only, and is -- not intended for use as a Quartus II input file. This file cannot be used -- to make Quartus II pin assignments - for instructions on how to make pin -- assignments, please see Quartus II help. --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -- NC : No Connect. This pin has no internal connection to the device. -- DNU : Do Not Use. This pin MUST NOT be connected. -- VCC : Dedicated power pin, which MUST be connected to VCC. -- VCCIO : Dedicated power pin, which MUST be connected to VCC -- of its bank. -- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND. -- It can also be used to report unused dedicated pins. The connection -- on the board for unused dedicated pins depends on whether this will -- be used in a future design. One example is device migration. When -- using device migration, refer to the device pin-tables. If it is a -- GND pin in the pin table or if it will not be used in a future design -- for another purpose the it MUST be connected to GND. If it is an unused -- dedicated pin, then it can be connected to a valid signal on the board -- (low, high, or toggling) if that signal is required for a different -- revision of the design. -- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins. -- This pin should be connected to GND. It may also be connected to a -- valid signal on the board (low, high, or toggling) if that signal -- is required for a different revision of the design. -- GND* : Unused I/O pin. Connect each pin marked GND* directly to GND -- or leave it unconnected. -- RESERVED : Unused I/O pin, which MUST be left unconnected. -- RESERVED_INPUT : Pin is tri-stated and should be connected to the board. -- RESERVED_INPUT_WITH_WEAK_PULLUP : Pin is tri-stated with internal weak pull-up resistor. -- RESERVED_INPUT_WITH_BUS_HOLD : Pin is tri-stated with bus-hold circuitry. -- RESERVED_OUTPUT_DRIVEN_HIGH : Pin is output driven high. -- NON_MIGRATABLE: This pin cannot be migrated. --------------------------------------------------------------------------------- --------------------------------------------------------------------------------- -- Pin directions (input, output or bidir) are based on device operating in user mode. --------------------------------------------------------------------------------- Quartus II 64-Bit Version 13.0.1 Build 232 06/12/2013 Service Pack 1 SJ Web Edition CHIP "rx8i" ASSIGNED TO AN: EPM7128SLC84-15 Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment ------------------------------------------------------------------------------------------------------------- GND+ : 1 : : : : : GND+ : 2 : : : : : VCCINT : 3 : power : : 5.0V : : rx_out_low : 4 : input : TTL : : : N bmb10 : 5 : input : TTL : : : N n_t_5x : 6 : input : TTL : : : N GND : 7 : gnd : : : : bac00 : 8 : input : TTL : : : N ac06l : 9 : bidir : TTL : : : N ac05l : 10 : bidir : TTL : : : N rx_init_low : 11 : output : TTL : : : N rx_12_bit_low : 12 : output : TTL : : : N VCCIO : 13 : power : : 5.0V : : TDI : 14 : input : TTL : : : N bmb00 : 15 : input : TTL : : : N initialize : 16 : input : TTL : : : N RESERVED : 17 : : : : : biop1 : 18 : input : TTL : : : N GND : 19 : gnd : : : : birq : 20 : output : TTL : : : N rx_run_low : 21 : output : TTL : : : N bskip : 22 : output : TTL : : : N TMS : 23 : input : TTL : : : N ac04l : 24 : bidir : TTL : : : N ac09l : 25 : bidir : TTL : : : N VCCIO : 26 : power : : 5.0V : : ac07l : 27 : bidir : TTL : : : N ac03l : 28 : bidir : TTL : : : N ac02l : 29 : bidir : TTL : : : N ac01l : 30 : bidir : TTL : : : N baclr : 31 : output : TTL : : : N GND : 32 : gnd : : : : rx_done_low : 33 : input : TTL : : : N ac00l : 34 : bidir : TTL : : : N ac10l : 35 : bidir : TTL : : : N ac11l : 36 : bidir : TTL : : : N n_t_7x : 37 : output : TTL : : : N VCCIO : 38 : power : : 5.0V : : n_t_8x : 39 : output : TTL : : : N n_t_9x : 40 : output : TTL : : : N rx_data_low : 41 : bidir : TTL : : : N GND : 42 : gnd : : : : VCCINT : 43 : power : : 5.0V : : ac08l : 44 : bidir : TTL : : : N bmb11 : 45 : input : TTL : : : N bts3 : 46 : input : TTL : : : N GND : 47 : gnd : : : : rx_tr_req_low : 48 : input : TTL : : : N md03_low : 49 : input : TTL : : : N bac08 : 50 : input : TTL : : : N md07_low : 51 : input : TTL : : : N md08_low : 52 : input : TTL : : : N VCCIO : 53 : power : : 5.0V : : bac09 : 54 : input : TTL : : : N bac06 : 55 : input : TTL : : : N tp4 : 56 : input : TTL : : : N biop4 : 57 : input : TTL : : : N bac03 : 58 : input : TTL : : : N GND : 59 : gnd : : : : bmb01 : 60 : input : TTL : : : N n_t_1x : 61 : input : TTL : : : N TCK : 62 : input : TTL : : : N bac11 : 63 : input : TTL : : : N bac02 : 64 : input : TTL : : : N bac07 : 65 : input : TTL : : : N VCCIO : 66 : power : : 5.0V : : biop2 : 67 : input : TTL : : : N rx_shift_low : 68 : input : TTL : : : N bac05 : 69 : input : TTL : : : N bmb02 : 70 : input : TTL : : : N TDO : 71 : output : TTL : : : N GND : 72 : gnd : : : : md06_low : 73 : input : TTL : : : N bac04 : 74 : input : TTL : : : N bac01 : 75 : input : TTL : : : N md04_low : 76 : input : TTL : : : N rx_error_low : 77 : input : TTL : : : N VCCIO : 78 : power : : 5.0V : : n_t_6x : 79 : input : TTL : : : N bmb09 : 80 : input : TTL : : : N md05_low : 81 : input : TTL : : : N GND : 82 : gnd : : : : GND+ : 83 : : : : : bac10 : 84 : input : TTL : : : N